gbu10005 - gbu1010 document number: ds30052 rev. 6 - 2 1 of 4 www.diodes.com november 2012 ? diodes incorporated gbu10005 - gbu1010 10a glass passivated bridge rectifier features ? glass passivated die construction ? high case dielectric strength of 1500v rms ? low reverse leakage current ? surge overload rating to 220a peak ? ideal for printed circuit board applications ? ul listed under recognized component index, file number e94661 ? lead-free finish; rohs compliant (notes 1 & 2) mechanical data ? case: gbu ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish. solderable per mil-std 202, method 208 ? polarity: marked on body ? mounting: through hole for #6 screw ? mounting torque: 5.0 inch-pounds maximum ? marking: date code and type number ? weight: 4 grams (approximate) ordering information (note 3) part number case packaging gbu10005-gbu1010 gbu 20/tube notes: 1. eu directive 2002/95/ec (r ohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen- and antimony-free, "gree n" and lead-free. ? 3. for packaging details, go to our website at http://www.diodes.com. maximum ratings and el ectrical characteristics (@t a = +25c, unless otherwise specified.) single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol gbu 10005 gbu 1001 gbu 1002 gbu 1004 gbu 1006 gbu 1008 gbu 1010 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r ( rms ) 35 70 140 280 420 560 700 v average forward rectified current (note 4) @ t c = +100 c i ( av ) 10 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 220 a forward voltage (per element) @ i f = 5.0a v fm 1.0 v peak reverse current at rated dc blocking voltage @ t c = +25 c @ t c = +125 c i r 5.0 500 a i 2 t rating for fusing (note 5) i 2 t 200 a 2 s typical total capacitance per element (note 6) c t 60 pf typical thermal resistance junction to case (note 4) r jc 2.2 c/w operating and storage temperature range t j, t stg -55 to +150 c notes: 4. unit mounted on 100mm x 100mm x 1.6mm copper plate heatsink. 5. non-repetitive, for t > 1.0ms and < 8.3ms. 6. measured at 1.0mhz and appl ied reverse voltage of 4.0v dc. pb
gbu10005 - gbu1010 document number: ds30052 rev. 6 - 2 2 of 4 www.diodes.com november 2012 ? diodes incorporated gbu10005 - gbu1010 0 2 4 6 8 10 05 01 0 01 5 0 i, av g f o r wa r d r e c t i f ied c u r r e n t (a) (av) t , case temperature ( c) figure 1 forward current derating curve c resistive or inductive load 0.1 1.0 10 100 0.2 0 0.6 1.0 1.8 i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (a) f v , instantaneous forward voltage (v) figure 2 typical forward characteristics, per element f t = 25c j 1.4 0 100 200 250 110100 i, p eak f o r wa r d s u r g e c u r r e n t (a) fsm number of cycles at 60hz figure 3 maximum non-repetitive surge current single half-sine wave t = 25c j 150 50 1,000 0.1 1.0 10 100 c , t o t al c a p a c i t an c e (p f ) t v , reverse voltage (v) figure 4 typical total capacitance, per element r t = 25c j f = 1.0mhz 100 10
gbu10005 - gbu1010 document number: ds30052 rev. 6 - 2 3 of 4 www.diodes.com november 2012 ? diodes incorporated gbu10005 - gbu1010 package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. gbu dim min max a 21.8 22.3 b 3.5 4.1 c 7.4 7.9 d 1.65 2.16 e 2.25 2.75 f 1.95 2.35 g 1.02 1.27 h 4.83 5.33 j 17.5 18.0 k 3.2 x 45 l 18.3 18.8 m 3.30 3.56 n 0.46 0.56 o 1.90r p 0.76 1.0 all dimensions in mm - ~ ~ + a b k d e f g h j m n p l c o
gbu10005 - gbu1010 document number: ds30052 rev. 6 - 2 4 of 4 www.diodes.com november 2012 ? diodes incorporated gbu10005 - gbu1010 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated a nd all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
